Listed here are numerous detailed fitting guides for most of your contact lens needs. These guides are for the routine and not-so-routine fits. As a convenience you may print out these guides for your daily use.
Accent is a new translating progressive contact lens that provides excellent vision for distance, near and intermediate ranges. It performs extremely well in high add powers of +2.00 and greater.
Its design incorporates a revolutionary translating aspherical distance zone with near spherical optics. Your patient's vision will be crisp and sharp at all ranges.
Accent is designed for simplicity. You fit the lens the same as any spherical single vision lens. However, Accent incorporates a minimal amount of prism for proper orientation and translation.
Because of its "Thin Harmonic Profile", Accent will outperform other segmented bifocals for comfort and clarity.
AccuCone Fitting System
AccuCone Fitting System is a step by step format that provides detailed instruction on fitting Keratoconus patients. The format incorporates the use of varying sagittal depths by changing base curve and or diameter along with varying axial edge lifts from flat, medium and steep. Trial lens fitting is highly recommended. Sets range in base curves from 7.18 to 5.11 and in diameters 8.4 and 9.0.
AccuFocal / AccuFocal Plus
AccuFocal and AccuFocal Plus are aspheric, simultaneous vision multifocal contact lenses manufactured in a MidDK Material such as Paragon HDS®. The design combines an aspheric back surface with a spherical front surface. The hyperbolic base curve flattens from the center to the edge producing a progressive increase in plus power.
This progressive change creates a multifocal effect correcting a petient's vision at distance, intermediate and near. Lens translation in not necessary.
AccuFocal works well for patients requiring a wide range of vision such as computer operators, mechanics, and carpenters. It is indicated for +6.00 hyperopes to -8.00 myopes with +2.50 add or less.
Accusoft Multifocal is a custom aspheric multifocal that is available in two materials, a 53% water content material and our innovative non-dehydrating Hioxifilcon B material. It is available in three base curves, two different optic zones and in two add powers. AccuSoft Multifocal can solve those challenging soft prescriptions that have add power needs.
AccuSoft Toric Multifocal
Accusoft Toric Multifocal is a custom aspheric toric multifocal that is available in two materials, a 53% water content material and our innovative non-dehydrating Hioxifilcon B material. It is available in three base curves, three different optic zones, two add powers and cylinder powers up to 3.00 diopters. AccuSoft Toric Multifocal can solve those challenging soft prescriptions that have cylinder and add power needs.
AquaFlow is our newest spherical lens design that incorporates our revolutionary design system "Fluid Edge Technology". Fluid Edge Technology combines our dual aspheric posterior design with our proprietary thin harmonic profile design and Aqua Wet Plasma Treatment. Fluid Edge Technology allows for exceptional tear flow on and around a lens edge surface for unsurpassed corneal health and patient comfort.
Clarity Plus is our newest aspheric multifocal GP contact lens. It is indicated for presbyopic prescriptions that have up to a +2.50 add power. Its proprietary dual aspheric design allows for an alignment fit without sacrificing sharp stable vision at all distances.
Clarity Plus Extended Add
Clarity Plus Extended Add is an aspheric multifocal translating lens design that incorporates a concentric zone for near enhancement. It is indicated for presbyopic add powers from +2.50 and greater. Its proprietary dual aspheric design allows for an alignment fit eliminating the need to fit excessively steeper than flat "K". Patients who wear Clarity Plus Extended Add have clear stable vision at all distances no matter what the add power.
The Comfort SL scleral lens is a semi-sclera design. It is intended for non-distorted ametropia eyes. It incorporates a proprietary multiple posterior curve system to obtain corneal alignment. Patients who wear Comfort SL will have unsurpassed comfort and clarity throughout the day. When ordering, all that is required are Ks, Rx, and Corneal Diameter. If corneal distortion is suspected a MAXIM Scleral Lens should be used.
ComfortPerm is an enhanced diameter aspherical gas permeable contact lens. Patients find it to be much more comfortable than conventional GP designs because there is less lid interaction, less movement across the cornea and a complete elimination of flare and glare.
When manufactured in a premium mid-DK material such as Paragon HDS®, your patients will enjoy unparalleled comfort and vision – "The comfort of a soft lens with the vision of a rigid lens."
Criterion with "Canted Zone Technology" is indicated for those very irregular corneas where excessive edge lift is an issue. Patients who exhibit severe ectasia from Pullucid Marginal Degeneration or corneal distortion with excessive inferior corneal steepness are excellent candidates for Criterion. "Canted Zone Technology" allows for different individual base curves in four quadrants of the posterior surface eliminating excessive edge lift.
Horizon 30 is our long proven spherical lens design that is indicated for myopic, hyperopic and astigmatic corrections. It incorporates an aspheric periphery with a minimum edge thickness for exceptional patient comfort.
Horizon Cone Fitting System is a step by step format that provides detailed instruction on fitting Keratoconus patients. The format incorporates the use of varying sagittal depths by changing base curve and or diameter. Trial lens fitting is highly recommended. Sets range in base curves from 7.18 to 5.44 diopters and in diameters from 8.0 to 9.5.
Maxim™ Scleral Lens
Maxim is a semi-sclera lens. The standard trial lenses are 16.0mm in diameter. The Maxim design performs very well on irregular corneas including keratoconus, corneal trauma, pellucid marginal degeneration, penetrating keratoplasties, post LASIK and RK patients. It incorporates a proprietary multiple posterior curve system to obtain corneal alignment. Patients who wear Maxim will have exceptional comfort and clarity though out the day.
NewVision is indicated for plateau shaped corneas due to LASIK, RK or other surgical procedures. Its proprietary design will contour to the patients corneal irregularity thus producing a well centered physical fit.
Polyvue Presbyopic System is a new an exciting multifocal product that incorporates high definition optics for superior stable vision. The system consists of two lens designs, the High Definition lens and the High Definition HDX progressive. PolyVue's key features are superior aberration control, convenient quarterly replacement and uniform pricing. PolyVue lenses are indicated for patient who have up to a +2.50 add. They are manufactured in polymacon and are available in a 196 lens dispensing set.
SOFT K - Keratoconus Soft Lens is a soft contact lens especially designed to fit Keratoconus patients when GP lenses are not successful. The base curve geometry is made up of a spherical optic zone and an aspheric periphery. The front curve has three zones, a thick optic zone to improve the optical quality, a special lenticular zone for structural stability, and an edge zone for comfort.